Canon imageRUNNER ADVANCE C5560 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 25

Canon imageRUNNER ADVANCE C5560 Скачать руководство пользователя страница 23

[Service work]

If the above-mentioned symptom occurs, check whether the front/rear tray auxiliary guide operates normally.
If the front/rear tray auxiliary guide does not operate normally, prepare the washer (XD1-1106-235), modify the bushing of the
lower delivery roller and adjust the assembly of the front/rear tray auxiliary guide holder by following the procedures below.
However, in case of replacement by the new-type lower delivery roller, washer (XD1-1106-235) is not necessary.
1) Remove the stack tray [1] and the grate-shaped lower guide [2] by referring to the Service Manual.

2) If the bushing [2] on the rear side of the lower delivery roller [1] is detached from the supporting plate, go to the step 3). If the
bushing [2] is not detached, go to the step 7).

3) Remove the supporting plate [1] of the bushing on the near side.
- Screw [2] 1 pcs

4) Remove the busing [2] from the lower delivery roller shaft [1].

20

«
...
21
22
23
24
25
»

Содержание imageRUNNER ADVANCE C5560


























Отзывы:

Нет отзывов