Canon imagerunner advance C5550i, Руководство пользователя

Страница: 778 / 1556

● Direct sending of faxes does not support this setting. If a paper jam occurs while performing direct
sending, the job will be canceled. In this case, set the job again.
● Depending on the location of a paper jam, it can be difficult to determine
whether document scanning has been completed. If you have set
<From Suspnd. Original> for <Feeder Jam Recovery Method> and you
do not find until which page the document has been scanned, it is
recommended that you cancel the job, and then execute it again.
<Set Detection of Feeder Multi. Sheet Feed as Default>
<Function Settings> <Common> <Scan Settings>
You can set whether to display a message on the screen when multiple sheets are fed. Basic Operations for
Sending Faxes(P. 319) Basic Operations for Scanning Originals(P. 411)
<Scanner Noise Settings>
<Function Settings> <Common> <Scan Settings>
You can set whether priority is given to scanning speed or to noise reduction when the original is scanned from
the feeder.
<Streak Prevention>
<Function Settings> <Common> <Scan Settings>
You can set whether to detect and prevent streaks when scanning originals.
● When <On> is selected, extremely thin lines may be detected as streaks.
<Speed/Image Quality Priority for B&W Scan>
<Function Settings> <Common> <Scan Settings>
You can set whether priority is given to scanning speed or to image quality when performing black and white
scanning from the feeder.
<LTRR/STMT Original Selection>
<Function Settings> <Common> <Scan Settings>
You can forcibly designate the way the machine handles LTRR and STMT originals that are placed on the platen
glass.
<Remote Scan Gamma Value>
<Function Settings> <Common> <Scan Settings>
You can set the gamma value to use when scanning color documents into your computer through the Network
Scan function. Select the gamma value most suited to your computer settings so that you can print the
document with the optimal density.
Settings/Registration
766