Canon imageRUNNER ADVANCE C5500 II Series, Документ ожиданий клиента, Страница: 50 / 96

imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document
Version 6
imageRUNNER ADVANCE C5500 and C5500 II Series Customer Expectations Document
Page 50
Staple Finisher-Y1 and 2/3 Hole Puncher Unit-A1 Table Continued
Item Specifications
Capacity Per Tray
22
Tray Mode Paper Size
B
(Upper)
No Collating,
Collate and
Group Modes Set
LTR, EXEC, STMT, and STMTR:
250 sheets (or 1 7/8” (47 mm) in height)
12 5/8” x 17 11/16”, 12” x 18”, 11” x 17”, LGL,
LTRR:
125 sheets (or 1” (24 mm) in height)
Offset (Collate &
Group)
LTR and EXEC:
250 sheets (or 1 7/8” (47 mm) in height)
11” x 17”:
125 sheets (or 1” (24 mm) in height)
With Different
Paper Sizes
125 sheets (or 1” (24 mm) in height)
A
(Lower)
No Collating,
Collate and
Group Modes Set
LTR, EXEC, STMT, and STMTR:
3,000 sheets (or 16 5/8” (423 mm) in
height)
24
12 5/8” x 17 11/16”, 12” x 18”, 11” x 17”, LGL,
LTRR:
1,500 sheets (or 8 1/2” (216 mm) in height)
Offset (Collate &
Group)
LTR and EXEC:
3,000 sheets (or 16 5/8” (423 mm) in
height)
24
11” x 17”, LGL, and LTR:
1,500 sheets (or 8 1/2” (216 mm) in height)
Corner/Double
Staple
LTR and EXEC:
Total of 200 sets or 3,000 sheets
(or 16 5/8” (423 mm) in height)
11” x 17”, LGL and LTRR:
Total of 100 sets or 1,500 sheets
(or 8 1/2” (216 mm) in height)
Staple-Free
LTR: 200 sets
11” x 17”: 100 sets
C
(Inner)
Up to 100 sheets (21.7 lb bond (81.4 g/m
2
))
IMPORTANT
•
The Staple-Free mode can only be used with Thin, Plain, Color, Recycled, and
Pre-Punched paper.
•
The Staple Finisher-Y1 can staple any other paper type except, Transparencies,
Tracing Paper, and Labels.
24 If the customer uses Thin Paper (14 to 15 lb bond (52 to 59 g/m2)), the tray can hold approximately 1,500 sheets
(or 8 1/2” (216 mm) in height).