Canon imageRUNNER ADVANCE C5255 Скачать руководство пользователя страница 200

Страница: 200 / 208

200

Q&A

The touch panel display is

completely black.

The main power has not been

turned ON, or the machine may

have entered the Auto Sleep

mode to save energy. Follow the

procedure below.

Turning the main power ON

1. Check whether the power plug is firmly

inserted into the outlet.

2. Open the main power switch cover

located on the right side of the machine
and switch the main power switch to the
“I” side to turn the power ON.

(

)

Recovering from the Auto Sleep
mode

Press the

(Energy Saver).

Additional Information

• For more information on the Auto Sleep

mode and Energy Saver mode, see
e-Manual > Basic Operations.

• Follow the procedure below to change the

Auto Sleep Time.

1. Press

(Settings/Registration).

2. Press [Preferences]



[Timer/Energy

Settings]



[Auto Sleep Time].

3. Specify the time



press [OK].

I have just sent an important

document via facsimile. Can I

check to make sure that it was sent

correctly?

You can check the send job status

from the Status Monitor/Cancel

screen or receive notification of the

sending result via e-mail.

To check from the Status
Monitor/Cancel screen:

1. Press

(Status Monitor/Cancel).

2. Press [Send]



[Log].

To receive send result via
e-mail:

1. Press [Fax]



[Options]



[Job Done

Notice].

2. Specify the e-mail address where you

want to receive the result notification.

Additional Information

If the Fax TX Report is set, you can output
and check the Fax TX Report every time.
Also, if the Fax Activity Report is set, you can
output and check Fax Report from the past.
For more information, see e-Manual > Basic
Operations.

Basic Operation Guide: imageRUNNER ADVANCE (iRA) C5235, iRA C5240, iRA C5250, iRA C5255 - 04/2012

Содержание imageRUNNER ADVANCE C5255

















































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE C5255

Отзывы:

Бренды по названию

Популярные бренды

Canon imageRUNNER ADVANCE C5255, Основное руководство по эксплуатации

Результаты поиска

Содержание imageRUNNER ADVANCE C5255

Отзывы:

Бренды по названию

Популярные бренды