Canon IMAGERUNNER ADVANCE C5030, Начало работы, Страница: 187 / 252

11
Before Using the Fax Function
Fax Settings
11-3
Setting the Display Language
If you decide to switch the display language, set Language/Keyboard Switch On/OFF to 'On' before entering characters.
If Language/Keyboard Switch On/OFF is set to 'Off', and then you set it to 'On' after entering characters, the characters may
not be displayed correctly. In this case, either re-enter the characters after setting Language/Keyboard Switch On/OFF to 'On',
or enter characters with Language/Keyboard Switch On/OFF set to 'Off'.
If Language/Keyboard Switch On/OFF is set to 'On', some characters are restricted and cannot be entered. (See e-Manual >
Settings/Registration.)
Selecting the Type of Telephone Line
Set the type of telephone line that is connected to the machine.
To set the type of telephone line connected to the machine with the FAX Board installed, check whether it is a rotary dial
(rotary pulse) or a touch-tone type and make the correct setting.
If the Super G3 2nd Line Fax Board is installed, perform the same registration procedure for the additional line, too. (See e-
Manual >Settings/Registration.)
The telephone line type you can select here is for line 1. To select the telephone line type for an additional line, see e-Manual >Settings/
Registration.
For this setting, the FAX Board is required.
1
Press → [Function Settings] → [Send] → [Fax Settings] → [Set Line] → [Line 1]
→ [Select Line Type] .
2
Select the type of telephone line → press [OK] .
If you do not know the telephone line type, call your telephone service provider for details.