Canon imageRUNNER ADVANCE C2020, Руководство по обслуживанию

Страница: 236 / 292

SERVICE MODE
S-94
COPIER/PRINTER>OPTION
SENS-CNF
Use it to select the appropriate sensor series (arrangement).
Settings 0: AB, 1: Inch, 2: A
EC-GLASS
Use it to specify the presence/absence of an EC coating on the copyboard
glass.
Settings 0: EC coat absent, 1: EC coat present (default: 0 for 100-V model, 1 for
other models)
TBLT-ADJ
Use it to enable execution of displaced registration caused by uneven thick-
ness of the transfer belt.
Settings 0: Disable, 1: Enable [Default: 1]
HS-SW
Use it to enable or disable the result of executing head shading.
Settings 0: Disable, 1: Enable [Default: 1]
F-WEB
Use it to change the frequency at which the web solenoid (SL4) turns on.
Settings 0: Reference value, 50: Twice the reference value, 200: 1/2 the reference
value [Default: 0]
2S-RG-DT
Use it to enable or disable erasing of part of images falling outside paper as
determined by the result of detection made by the side registration sensor
(S32) when the duplex unit is used.
Settings 0: Disable, 1: Enable [Default: 1]
Reference In printing mode, images are shifted to reflect the result of detection regard-
less of the setting made in this mode. (See 5.4 “Detecting the Position of
Side Registration” in Chapter 6 of the Printer Manual.)