imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
Version 7 imageRUNNER ADVANCE 8500 and 8500 II Series Customer Expectations Document
Page 77
6.20 Copy Card Reader-F1
Item
Specifications
Available Cards
Magnetic
Card Readout Method
Magnetic readout
Magnetic Card Reading
Direction
Face up
Store/Replay
Replay
Power Source
From the main unit.
Dimensions (H x W x D)
1 5/8” x 3 1/2” x 3 3/4” (40 mm x 88 mm x 96 mm)
Weight
Approximately 7.1 oz (200 g) (Includes the attachment kit and cable.)
6.21 Super G3 FAX Board-AS1
Protocol
Specifications
Telephone Line Used
Public Switched Telephone Network
Scan Line Density
(Scan, Transmission)
Standard:
8 pels
/mm x 3.85 line/mm
Fine:
8 pels
/mm x 7.7 line/mm
Super-Fine: 8 pels
/mm x 15.4 line/mm
Ultra-Fine:
16 pels
/mm x 15.4 line/mm
Transmission Speed
Super G3:
33.6 kbps
G3:
14.4 kbps
Compression Method
MH, MR, MMR, JBIG
Transmission Type
Super G3, G3
Sending Original Size
11” x 17” to STMTR
Receiving Paper Size
11” x 17” to STMTR
Transmission Times
JBIG: Approximately 2.6 seconds
Auto Dial Function
Address Book: 1,800 destinations
(Including destinations stored in one-touch buttons.)
Image Memory
Approximately 6,000 pages
46 Excludes the attachment kit and cable.
47 The specifications remain the same even when the optional Super G3 2
nd
Line Fax Board-AS1 or Super G3
3
rd
/4
th
Line Fax Board-AS1 is installed.
48 If the user uses an IP telephone service, facsimile communications may not be performed normally via an IP
telephone line. It is recommended to use a general telephone (Public Switched Telephone Network) line for
facsimile communications.
49 Pels stands for picture elements (pixels).