Canon imageRunner Advance 6255 Скачать руководство пользователя страница 95 | Manualshive

Страница: 95 / 214

Canon imageRunner Advance 6255 Скачать руководство пользователя страница 95

95

Routine Maint

enanc

e

•   Use only toner cartridges intended for use with this machine.
•   For information on the supported Canon genuine toner, see “Consumables,” on p. 108.
•   Do not replace toner cartridges until the message prompting you to do so appears.
•   You can replace a toner cartridge while the machine is printing.

• Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or [Next] on the touch

panel display.

• If toner runs out during a print job, the remaining prints are made after you replace the toner cartridge.
• After replacing toner cartridges, if printed gradation and density are diff erent from the gradation and density printed before

you replaced the toner cartridges, perform an [Auto Adjust Gradation] in [Adjustment/Maintenance] (Settings/Registration).
(See e-Manual > Settings/Registration.)

1

Press [

].

If a screen with instructions on how to replace the toner cartridge appears on the touch panel display, this
step is not necessary.

2

Open the toner replacement cover, by holding the left and right handles.

If equipment such as fi nisher is attached, open the cover by holding the right handle.

«
...
93
94
95
96
97
...
»

Содержание imageRunner Advance 6255























































































































































































































Отзывы:

Нет отзывов