Canon imageRUNNER ADVANCE 4225 Скачать руководство пользователя страница 75

Страница: 75 / 190

Routine Maint

enanc

Remove the drawer and envelopes.

1. Pull and lift the paper

drawer out of the machine
by holding its left and right
sides with both hands.

2. Remove the envelopes that

are loaded in the paper
drawer (several envelopes at
a time).

Slide the left guide to align it with the mark for the desired envelope size.

* Left Guide

Adjust the front guide.

1 3

1. Loosen the two screws fi xing

the front width guide of the
envelope feeder attachment.

2. Press down on the envelope

receptacle, and move the
front width guide to align
it with the mark for the
desired envelope size.

3. Fix the front width guide in

place with the screws.

Содержание imageRUNNER ADVANCE 4225































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 4225

Отзывы:

Canon imageRUNNER ADVANCE 4225, Основное руководство по эксплуатации, Страница: 75 / 190

Результаты поиска

Содержание imageRUNNER ADVANCE 4225

Отзывы: