Canon imageRUNNER 2870, Руководство по обслуживанию

Страница: 9 / 37

Chapter 1
1-2
saved as the backup in the iR/imageRUNNER. Parts replacement will not deactivate the
feature.
The staff in each regional headquarters can access the administrator's pages of the LMS.
They can view the license number issued for each iR/imageRUNNER and can reissue the
license. The procedures are the same as the license management system for MEAP except
for the point the license key is used instead of the license file.
Transfer of a License
An optional function that has been enabled by the LMS may be used on a different device
by transferring its license, as when the original iR device needs to be replaced, say at the
end of its lease arrangement. Specifically, individual licenses registered for optional
functions must first be invalidated in user mode before transfer may take place. Doing so
will invalidate the optional functions on the source iR device and, at the same time, proof
of invalidation will be generated within the device in the form of an invalidation license key.
The user may then communicate the indicated invalidation license key, the serial number of
the original iR device, and the serial number of the new iR device to the Sales Company,
which in turn may issue a new license key for the new iR device. The user now may register
the new license key to the new iR device in user mode, thereby enabling the optional
function on the new iR device. For details of transferring a license in service mode, see the
descriptions of service mode that come later.
Notes:
Security kit requires that a license key is obtained/registered, and optional PCI bus
extension kit, security extension board (USB) and 256MB extension RAM are installed.
If these options are not installed, "There are not enough required features for install." is
displayed at the license registration, and this function cannot be enabled.