Canon imageRUNNER 2206 Скачать руководство пользователя страница 125

Страница: 125 / 235

Clearing Jams

3EEJ-02H

If a paper jams, <Paper jammed.> is displayed on the screen. Press <Next> to display simple solutions. If it is difficult to

understand the procedures on the display, see the following sections to clear jams.

Paper Jams in the Paper Drawer 1(P. 121)
Paper Jams around the Output Area(P. 124)
Paper Jams around the Fixing Assembly(P. 126)
Paper Jams in the Multi-Purpose Tray(P. 127)

When removing the jammed paper, do not turn OFF the machine

Turning OFF the machine deletes the data that is being printed.

If paper tears

Remove all the paper fragments to prevent them from becoming jammed.

If paper jams repeatedly

●

Tap the paper stack on a flat surface to even the edges of the paper before loading it into the machine.

●

Check that the paper is appropriate for the machine.

Available Paper(P. 194)

●

Check that no jammed paper fragments remain in the machine.

Do not forcibly remove the jammed document or paper from the machine

Forcibly removing the paper may damage parts. If you are not able to remove the paper, contact your local

authorized Canon dealer.

When a Problem Cannot Be Solved(P. 149)

Paper Jams in the Paper Drawer 1

Remove the jammed paper from the output tray.

Troubleshooting

121

Содержание imageRUNNER 2206












































































































































































































































Результаты поиска

Содержание imageRUNNER 2206

Отзывы:

Canon imageRUNNER 2206, Руководство пользователя, Страница: 125 / 235

Результаты поиска

Содержание imageRUNNER 2206

Отзывы: