9
6
7
8
9
5
4
a
a
a
b
c
b
a
Install the Printhead
1
2
3
a
b
Insert the printhead into the carriage (b)
with the ink holes (a) facing away from the
printer as shown in the figure.
Carefully
push the printhead firmly into the carriage
(b), ensuring that the part covered by
the protective part does not touch the
carriage.
Pull the printhead fixer cover down toward
the front to lock the printhead in place.
Push the printhead fixer lever back.
Close the top cover.
• The printhead contains ink, so be careful
not to spill it once the protective parts are
removed.
• Do not reattach the protective part after
removing it. Dispose of these materials
according to local regulations.
• Never touch the parts covered by the
protective part. This may damage the
printhead and affect printing quality.
Remove the orange protective part (a). To
remove orange protective part (b), push
the grip (c) as you remove the
part
.
Hold the printhead by the grips (a) as you
remove it from the pouch.
When
Open top cover.
is displayed on
the display screen, open the top cover.
Pull the printhead fixer lever forward all
the way to open it completely.
Instructions are now shown on the
display screen regarding printhead
installation.
Lift the printhead fixer cover (a) to open it
fully.
At this time, make sure that no debris
becomes adhere to the contacts (b) on
the carriage.