Introductory Information
ENG
Setup Guide
Series
Series
Series
QT5-749-V
PRINTED IN CHINA
©CANON INC. 205
*
Q
T
5
7
4
1
9
V
1
*
Caution
Instructions in this Setup Guide show the iPF840 printer. Note that your printer may look different from these illustrations in some cases.
However, the basic operations are the same.
•
The markers used in this setup guide are
for the iPF830 series,
for the iPF840 series, and
for the iPF850
series.
•
150mm
100mm
600mm
200mm
200mm
150mm
100mm
600mm
200mm
200mm
1500mm
600mm
900mm(*)
258mm
150mm
200mm
200mm
100mm
• If you are using the optional wheeled
output stacker, you should reserve space
of the same dimensions as the iPF840.
• Reserve space that does not have any steps so that there
are no obstacles to moving the Stacker.
Assemble the Stand
*
(P.3)
(P.3)
Install the Printer
(P.3)
Attach the Media Take-up Unit
(P.5)
Set Up the Output Stacker
(P.5)
Prepare to Turn the Power On
(P.5)
Install the Ink Tanks
(P.7)
Install the Printhead
(P.9)
Load Paper to Adjust the Printhead
(P.10)
Install the Software
(P.11)
Store Accessories in the Pockets
(P.17)
How to Display the Electronic
Manuals
(P.18)
*
*
*
Attach the Stacker
(P.17)
*
Install the Roll Unit
Details for each step are given in this Setup Guide. Simply follow the instructions to
install the printer.
If an error message is displayed during setup or other problems occur, refer to
"Responding to Messages" on page 20.
Introduction
Read this manual before attempting to operate the printer.
Keep this manual in a handy location for future reference.
MEMO
Some items are included with the printer but not described in this manual.
Keep these items in a safe place after setup because they are used in
various printing applications.
•
For instructions on the included items not described in this manual, refer to
the User's Guide.
•
A cable to connect the printer to a computer is not provided with the printer.
•
• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON
INC.
• Microsoft is a registered trademark of Microsoft Corporation.
• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other
countries.
• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or
other countries.
• Mac, Mac OS, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other
countries.
• All other trademarks or registered trademarks described in this Setup Guide are the property of
their respective owners.
Even if you do not use the printer driver, be sure to install
Media
Configuration Tool
from the provided User Software CD-ROM. With
Media
Configuration Tool
, the paper types that are available in your area can be
registered to the printer. For instructions on installation, refer to "Install the
Software" on page . (In Windows, select
Install Individual Software
in
the
Setup Menu
window to install
Media Configuration Tool
only.)
•
Before setting up the printer, check the completed image of the printer you purchased and make sure you have enough space to set up the printer. It is
recommended that you reserve space of the following dimensions to allow you to work around the printer.
Overview of Setup
Before Setting Up the Printer
Installation space 2293 × 675 × 58
(W x D x H mm)
Installation space 2293 × 99 × 58
(W x D x H mm)
Installation space 2293 × 307 × 58
(W x D x H mm)
* This is the space that is required for
working between the stacker and
printer such as when replacing paper
or using the output stacker.
Set up the printer using the following procedure.
Only perform the steps for which the name of the model you purchased is
specified on the right of the printer.
* Refer also to the Setup Guide for the accessories and options in the following
table.
-List of accessories and options
• Printer Stand
• BU-03 Wheeled output
stacker (Option)
• TU-06 Media take-up unit
(Option)
• Printer Stand
(Roll unit support)
• BU-03 Wheeled output
stacker
• Printer Stand
(Roll unit support)
• RS-0 Stacker