Canon imagePROGRAF W8400D Скачать руководство пользователя страница 6

Страница: 6 / 6

Tape each printer cover in the reverse order of tape removal during

setup.

To remove the stacker, apply the attachment procedure in reverse.

Apply the printer mounting procedure in reverse to unmount the

printer.

Apply the stand assembly procedure in reverse to disassemble and

pack the stand.

Reattach the tapes and shipping materials to the roll holder and

printer, then pack them in the original shipping box.

This completes the preparation for moving the printer.

Содержание imagePROGRAF W8400D

Страница 2: ... MENU 3 Press or to select Maintenance then press 4 Press or to select Move Printer then press 5 Press or to select Yes then press OK Open RightCover is displayed 6 Open the back right cover Remove Ink Tank is displayed on the operation panel ...

Страница 4: ...so may damage the printer 11Rewind the roll media back onto the roll and remove the roll holder and the four overwind prevention stays and then remove the paper tray 12 Lower the holder stopper lever remove the stopper remove the roll from the roll holder then store the roll holder and the holder stopper ...

Страница 5: ...belt with the belt stopper then use the hex screws to fasten the belt stopper Attach the belt stopper that you removed and stored during the initial installation 14 Close the top cover 15 Remove the accessory pocket ...

Страница 6: ...reverse 18 Apply the printer mounting procedure in reverse to unmount the printer 19 Apply the stand assembly procedure in reverse to disassemble and pack the stand 20 Reattach the tapes and shipping materials to the roll holder and printer then pack them in the original shipping box This completes the preparation for moving the printer ...