Canon imagePROGRAF W2200, Руководство по обслуживанию

Страница: 41 / 76

W2200
Part 2 : Troubleshooting
2-23
3.4.3 Control board’s EEPROM initialization / destination settings
1) Press the
power
key while holding down the
set up
key and
online
key.
2) Select “EEPROM init.” with 㧪
㧪 㧪
㧪 key and execute with щ
щ щ
щ key.
Reset the EEPROM information to factory shipment settings.
However, the following items will not be initialized:
- Serial no. of USB
- Serial no. of IEEE1394
- Destination setting
3) When changing the destination settings, select “Set Destination” with
㧪 㧪 㧪 㧪
key and execute
with щ
щ щ
щ key.
As the setting is displayed, select ”Japan” for Japan, “Overseas” for overseas and “Overseas
US” for the US models. Press
щ
щ щ
щ key to execute.
4) After initializing the EEPROM, press the
power
key to power off the printer.
3.4.4 Clear the control board’s EEPROM waste ink counter
1) Press the
power
key while holding down the
set up
key and
online
key.
This will enter the service mode.
2) Select “Init Waste Ink” with 㧪 㧪 㧪 㧪 key and execute with щ щ щ щ key.
3) Select either “Main” or “Sub” waste ink counter with 㧪
㧪 㧪
㧪 key and fix the item to be cleared
by pressing
щ щ щ щ
key.
4) Then, press
щ щ щ щ
key to execute.
3) After clearing the waste ink counter, press the
power
key to power off the printer.