manualshive.com logo in svg

Canon ImagePRESS Server H350 V2, Руководство по обслуживанию

Canon ImagePRESS Server H350 V2 - мощное и надежное устройство для профессиональной печати. Здесь вы можете бесплатно загрузить сервисный мануал и руководство пользователя. Получите необходимую информацию для настройки и обслуживания устройства, загрузив их с manualshive.com.

Поделиться
Скачать
background image

Installing System Software

This chapter provides information about how to install system software.
The imagePRESS Server is shipped with system software pre-installed on the hard disk drives (HDD).
A reinstallation of the system software DVDs will be required if:

• You have replaced the hard disk drive.
• Restoring the system from backup images did not solve the problem you are troubleshooting.

 When you reinstall from the System Software DVDs

The following issues apply to the scenario where you reinstall the system from the System Software DVDs.

•

Jobs: 

When you reinstall system software, all jobs in all print queues and all jobs archived locally on the 

imagePRESS Server

hard disk are deleted. To save jobs, ask the site administrator to save them to removable media or a network location, so
they can be re-imported to the 

imagePRESS Server

 after system software installation. For more information, see Command

WorkStation Help.

•

Job Log:

 When you reinstall system software, the list of jobs in the Job Log and any jobs in the queues are deleted. The

site administrator can use Command WorkStation to save a current list of jobs (not the actual jobs) from the Job Log.

•

Fonts: 

When you reinstall system software, all fonts on the hard disk drives are deleted. Resident fonts are reinstalled when

you reinstall system software. Any customer-supplied fonts must be reinstalled by the site administrator (see Command
WorkStation Help).
To determine which additional fonts were downloaded to the 

imagePRESS Server

, print the Font List before you reinstall

the system software and again after you complete the system software installation. Any fonts not listed after installation will
need to be reinstalled. For more information about managing fonts, see Command WorkStation Help.

•

User software:

 The 

imagePRESS Server

 ships with preinstalled user software on the hard disk drives. During system

software reinstallation, you are prompted to reinstall user software (including Command WorkStation) using the User
Software DVD.

•

Server Configuration page:

 Before you reinstall a new version of system software, print the Server Configuration page.

The Server Configuration page provides a record of the customer’s current Setup configurations.

•

Backing up and restoring the configuration:

 All Setup configurations, as well as all custom files and templates stored on

the hard disk drives, are deleted when you reinstall system software. Always back up the current 

imagePRESS Server

configuration before you reinstall system software. After the installation is completed, be sure to restore the configuration
that you saved earlier. For instructions, please see

“Performing Backup and Restore” on page 64

.

•

Compatibility: 

After you upgrade system software, remind the site administrator to upgrade user software on all computers

connected to the 

imagePRESS Server

. Using old user software with new system software may negatively affect the system.

 Installing system software

Install both system software DVDs when you replace a hard disk drive or upgrade to the latest version of the imagePRESS Server
software. You can install software from the following disks:

• System Software DVD 1 - Fiery System Software for the imagePRESS Server.
• System Software DVD 2 and 3 - Windows operating system.
• User Software DVD 4 - Fiery User Software for installation on the imagePRESS Server and client computers.

■ Compatibility of the system software

Optional product name

Connectable host machine

imagePRESS Server H350 V2.0

imagePRESS C910/C810/C710CA

*2

imagePRESS Server H350(Version up) *1
imagePRESS Server H350

imagePRESS C910/C810/C710CA

*1) Since Windows version is different from imagePRESS Server H350 to imagePRESS Server H350 V2.0, OS upgrade kit is
necessary to update from imagePRESS Server H350 to imagePRESS Server H350 V2.0.
*2) Updating to the latest MFP firmware version is required to support 

imagePRESS C910/C810/C710CA

 by imagePRESS Server

H350 V2.0.

■ To install and verify the system software installation

Follow these instructions to complete the system software installation:

6. INSTALLING SYSTEM SOFTWARE

80

Содержание ImagePRESS Server H350 V2






















































































































Отзывы:

Нет отзывов

Похожие инструкции для ImagePRESS Server H350 V2

ONELAN OMNI-HD1 Installation & Configuration Manual preview
OMNI-HD1
Бренд: ONELAN Страницы: 24
IBM 7944E2U User Manual preview
7944E2U
Бренд: IBM Страницы: 21
Supermicro SUPERSERVER 6015C-NT User Manual preview
SUPERSERVER 6015C-NT
Бренд: Supermicro Страницы: 110
Kyocera Printserver Installation Manual preview
Printserver
Бренд: Kyocera Страницы: 207
Supermicro SUPERSERVER 5025M-UR User Manual preview
SUPERSERVER 5025M-UR
Бренд: Supermicro Страницы: 130
HIKVISION DS-6101HFI-IP User Manual preview
DS-6101HFI-IP
Бренд: HIKVISION Страницы: 31
Opengear cm4008 Quick Start Manual preview
cm4008
Бренд: Opengear Страницы: 4
Asus NAS-M25 User Manual preview
NAS-M25
Бренд: Asus Страницы: 82
Asus AR1000 Hardware Reference Manual preview
AR1000
Бренд: Asus Страницы: 32
Asus AP3000 Hardware Reference Manual preview
AP3000
Бренд: Asus Страницы: 42
Asus RS100-E5 - 0 MB RAM User Manual preview
RS100-E5 - 0 MB RAM
Бренд: Asus Страницы: 148
Asus PIKE II 3008 Series User Manual preview
PIKE II 3008 Series
Бренд: Asus Страницы: 80
Asus AP2300 Hardware Reference Manual preview
AP2300
Бренд: Asus Страницы: 44
Asus DS300j User Manual preview
DS300j
Бренд: Asus Страницы: 56
Asus AP2400R Reference Manual preview
AP2400R
Бренд: Asus Страницы: 40
Asus RS100-E7 Configuration Manual preview
RS100-E7
Бренд: Asus Страницы: 20
Asus Pentium 4 1U Rackmount Server AP160R-S User Manual preview
Pentium 4 1U Rackmount Server AP160R-S
Бренд: Asus Страницы: 46
Asus E9331 Configuration Manual preview
E9331
Бренд: Asus Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды