Canon imagePRESS Server G250 V2 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 99

background image

3. If you selected restore from a USB drive, make sure to connect the USB drive to the USB connector on the

imagePRESS Server

.

4. Click Continue.

■ To restore the system by booting from a bootable USB flash drive

You can restore from a bootable USB flash drive by following the installation procedure described in “To install the system
software” on

“Install the system software using the prepared USB flash drive” on page 60

NOTE:

The

imagePRESS Server

must remain powered ON during the backup or restore process.

Installing the system software

To install the system software, you need the following items:

Fiery Installer Builder

Using the Fiery Installer Builder you can download the system software files from EFI cloud server and prepare a USB flash
drive or SATA hard disk drive (HDD) to install the system software.

Account at EFI Sales Portal

You need to have an account at EFI Sales Portal to download the Fiery Installer Builder. If you do not have an account at
EFI Sales Portal, you can register at https://salesportal.efi.com/account/registration/.

Server name or IP address of the

imagePRESS Server

If the EFI Sales Portal account information is not available, or if you are not registered to the EFI Sales Portal, you can use
the server name or IP address of the

imagePRESS Server

to download the

imagePRESS Server

system software.

Any Windows computer with:

• Windows 8, or Windows 10

NOTE:

Security of PC may not be maintained when using Windows OS that Microsoft had ended support to.
It may become more vulnerable to security risks when installing system software on USB devices by FIB(Fiery Installer
Builder).
When installing the system software, make sure to use FIB (Fiery Installer Builder) with the PC running Microsoft-
supported Windows OS.
Check the support status of Microsoft from the following URL.
Microsoft Lifecycle Policy:
https://support.microsoft.com/en-us/hub/4095338/microsoft-lifecycle-policy
Example: January 14, 2020_Support for Windows 7 ends
https://www.microsoft.com/en-us/microsoft-365/windows/end-of-windows-7-support?rtc=1

• USB 3.0 port
• Minimum 500MB of available memory
• Internet connection enabled

To download the system software files, you need an Internet access.

Install the Fiery Installer Builder on this Windows computer.

USB flash drive

Use the USB flash drive for installing the system software on the

imagePRESS Server

.

NOTE:

Due to Windows file system restriction, the maximum size of the USB flash drive you can use is 32GB. The minimum size required
is 16GB.

Ethernet cable

An Ethernet cable is required if you want to install the

imagePRESS Server

system software through a peer-to-peer network

connection between your computer and

imagePRESS Server

.

4. INSTALLING SYSTEM SOFTWARE

52

«
...
56
57
58
59
60
...
»

Содержание imagePRESS Server G250 V2




































































































Отзывы:

Нет отзывов

Похожие инструкции для imagePRESS Server G250 V2

Бренд: NEC Страницы: 151

Бренд: i3 International Страницы: 2

Бренд: Gigabyte Страницы: 120

Бренд: Syncronorm Страницы: 17

Бренд: Kontron Embedded Computers Страницы: 46

ProLiant DL380 Gen10 Plus

Бренд: HP Страницы: 16

Бренд: HP Страницы: 43

ProLiant DL385p Generation 8

Бренд: HP Страницы: 57

ProLiant DL380 Generation9

Бренд: HP Страницы: 76

ProLiant DL360p Gen8

Бренд: HP Страницы: 4

ProLiant DL380 Generation 6

Бренд: HP Страницы: 50

ProLiant DL360p G8

Бренд: HP Страницы: 35

ProLiant DL560 Gen10

Бренд: HP Страницы: 146

ProLiant DL380 Generation 5

Бренд: HP Страницы: 41

ProLiant DL560 Gen10

Бренд: HP Страницы: 125

ProLiant DL380 Gen9

Бренд: HP Страницы: 142

ProLiant DL380 Gen9

Бренд: HP Страницы: 215

ProLiant DL380p Gen8

Бренд: HP Страницы: 133

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды