Canon imagePRESS C7010VPS/C6010VPS/C6010S Series Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 100

Canon imagePRESS C7010VPS/C6010VPS/C6010S Series Скачать руководство пользователя страница 7

How to use this manual

Notes for the reader

Introduction

This manual helps you to use the Perfect Binder-B1. The manual contains a description
of the product and guidelines to use and operate the Perfect Binder-B1.

Definition

Attention-Getters

Parts of this manual require your special attention. These parts can provide the following:

• Additional general information, for example, information that is useful when you

perform a task.

• Information to prevent personal injuries or property damage.

Symbols used in this manual

The following symbols are used in this manual to explain procedures, restrictions, handling
precautions, and instructions that should be observed for safety.

Overview of the attention-getters

#

Indicates

Icon

Word

Indicates a warning concerning operations
that may lead to death or injury to persons if
not performed correctly. To use the machine
safely, always pay attention to these warnings.

WARNING

Indicates a caution concerning operations that
may lead to injury to persons if not performed
correctly. To use the machine safely, always
pay attention to these cautions.

CAUTION

Indicates operational requirements and restric-
tions. Be sure to read these items carefully to
operate the machine correctly and to avoid
damaging the machine or property.

IMPORTANT

Indicates a clarification of an operation or
contains additional explanations for a proce-
dure. Reading these notes is highly recom-
mended.

NOTE

Chapter 1 - Introduction

7

Notes for the reader

«
...
5
6
7
8
9
...
»

Содержание imagePRESS C7010VPS/C6010VPS/C6010S Series





































































































Отзывы:

Нет отзывов