Canon imageFORMULA ScanFront 400, Руководство по обслуживанию

Страница: 12 / 21

imageFORMULA ScanFront 400 Service Guide
imageFORMULA ScanFront 400 Service Guide November 2016
Page 8
E. Recommended Replacement Parts
It is recommended that a dealer keep the following parts in stock for
replacement purposes in case of a hardware failure.
Table 6 – Recommended Replacement Parts List
Part Name Part Number
ScanFront 400 Motherboard MG1-5140-000
Control PCB MG1-5072-000
Reading unit (Upper) MG1-8331-000
Reading unit (Lower) MG1-8330-000
Sub PCB MG1-5070-000
Ultrasonic drive PCB MG1-4599-000
Registration roller MA3-0670-000
Eject roller MA3-0671-000
Follower roller MA2-9469-000
Feed motor MH7-1174-000
Main motor MH7-1199-000
LCD unit MF1-4901-000
Panel relay board MG1-5075-000
Power supply adapter MG1-5039-020
2 Part numbers are subject to change without notice.
F. End-User Periodic Maintenance
The parts in the table below must be cleaned or replaced periodically to
ensure a specific level of machine performance. Clean or replace the parts at
the interval specified below.
Item
Maintenance Interval (Sheets)
Remarks
200,000 As Needed
Main Body –
Clean
Clean with a slightly
dampened cloth to remove
any dirt, and then wipe dry
with a clean, dry cloth.
Touch Panel
–
Clean with a dry, lint-free
cloth.
Scanning Glass
Retard Roller
Replace
Clean with a slightly
dampened cloth to remove
any dirt, and then wipe dry
with a clean, dry cloth.
Feed Roller
Other Rollers –
Feed Path –
Clean with a commercially
available air blower to
remove any dust and paper
particles that may have
accumulated in the feed
path.