![background image](http://html.mh-extra.com/html/canon/imageformula-r10/imageformula-r10_user-manual_62998015.webp)
15
Moving the Scanner
When moving the scanner, always hold it with both hands to avoid
dropping it.
Make sure to disconnect USB cable and when moving the scanner. If
the scanner is carried with a cable connected, the connector may be
damaged or cause the scanner to fall and result in personal injury or
damage to the scanner.
Handling
Note the following precautions whenever using the scanner. Failure
to do so may result in a fire or electric shock.
Never place alcohol, benzene, paint thinner, or other flammable
substances near the scanner.
Do not allow water or flammable substances (alcohol, benzene, paint
thinner, etc.) to spill inside the scanner, as this may result in a fire or
electric shock.
Do not cut, damage, or modify the USB cable. Do not place heavy
objects on the cable, and do not pull or excessively bend the cable.
Never connect the USB cable when your hands are wet.
Do not knot or coil the USB cable, as this may result in a fire or
electric shock.
Use only the USB cable supplied with the scanner.
Do not attempt to dismantle the scanner or modify it in any way, as
this is dangerous and may result in a fire or electric shock.
Do not use flammable aerosol spray products near the scanner.
When cleaning the scanner, turn the scanner OFF and disconnect the
USB cable.
When disconnecting the USB cable, grasp it firmly by its connector.
Do not pull directly on the USB cable, as this may damage or expose
the cable's internal wiring, resulting in a fire or electric shock.
Clean the scanner using a slightly dampened cloth that has been well
wrung out. Never use alcohol, benzene, paint thinner, or any other
flammable substance.
If the scanner makes strange noises, or gives off smoke, heat, or
strange odors, or the scanner does not function or other
abnormalities occur when you use the scanner, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable. Then,
contact your local authorized Canon dealer or service representative
for further information.
Do not drop the scanner, or subject it to impact or strong shock.
Should the scanner ever become damaged, immediately close the
feed tray, turn the scanner OFF, and disconnect the USB cable. Then,
contact your local authorized Canon dealer or service representative
for further information.
Before moving the scanner, make sure to close the feed tray, turn the
scanner OFF, and disconnect the USB cable.
Customers with Pacemakers
This product emits a low level magnetic field.
If you have a cardiac pacemaker or other medical implant and feel any
abnormalities, move away from the product and consult your doctor.
Do not install the scanner on a surface that is unstable, tilted, or
subject to excessive vibrations. Doing so may cause the scanner to
fall, resulting in personal injury or damage to the scanner.
Never place small objects, such as staples, paper clips, or jewelry on
the scanner. These items may fall into the scanner and cause a fire or
electric shock. If such objects ever fall inside the scanner,
immediately close the feed tray, turn the scanner OFF, and disconnect
the USB cable. Then, contact your local authorized Canon dealer or
service representative to have the unit serviced.
Do not locate the scanner in a humid or dusty location. Doing so may
result in a fire or electric shock.
Do not place objects on top of the scanner. Such objects may tip or
fall over, resulting in personal injury.
When disconnecting the USB cable, grasp it firmly by its connector.
Do not pull directly on the USB cable, as this may damage or expose
the cable’s internal wiring, resulting in a fire or electric shock.
Leave sufficient space around the USB cable so that it can be
disconnected easily. If objects are placed around the USB cable, you
will be unable to disconnect it in an emergency.
Содержание ImageFormula R10
Страница 72: ...72 External Dimensions ...