51
3
To check the scanned image, click the [Finish] button.
To edit scan images, see Operations for the scanned image edit window52.
Click the [
] button to edit the output settings. -> "Setting the output"
Click the [Cancel] button to discard the scanned image and return to the main
window.
When the output has finished, a popup window will be displayed.
This completes the shortcut scans.
Scanning with Start Button
Scanning shortcuts" are allocated to the scanner start button in
advance.
You can set frequently-used scans to the scanning shortcuts, and
then allocate them to the start button.
If you place the document and press the Start button, CaptureOnTouch
starts and scanning starts.
If [Edit after scanning] is disabled in the scanning shortcut settings, the
edit window will not be displayed.
If you click [Open storage folder], the folder in which the saved
scanned images were saved opens. Depending on the output
settings, the [Open storage folder] button may not be displayed.
If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the
Environmental settings, the main CaptureOnTouch window will
not be displayed when a scan is started from the start button.
Only dialog boxes, error messages, and completion popup
windows are displayed during scanning.
If the [Do not display the main screen when the scan is started
with the scanner button] checkbox is enabled in the
Environmental settings, [Enable additional scan] and [Edit
after scanning] will be disabled when scanning is started from
the start button.