Canon imageFORMULA DR-G1100 Production Document... Скачать руководство пользователя

Страница: 24 / 126

2-3

Chapter 2 Setup

Installation Requirements

The following system requirements are recommended for optimal use of this scanner.

■

Computer

• CPU: Intel Core i3 2.13 GHz or faster
• Memory: 4 GB or more
• Hard disk: 3 GB or more available space required for

installation of all software

• USB interface: Hi-Speed USB 2.0
• Monitor: Resolution of 1024 x 768 (XGA) or better

recommended.

• Optical drive: Drive capable of reading DVDs.

■

Operating system

• Microsoft Windows XP Service Pack 3 or later
• Microsoft Windows XP x64 Edition Service Pack 2 or

later

• Microsoft Windows Vista Service Pack 2 or later (32-bit

and 64-bit editions)

• Microsoft Windows 7 Service Pack 1 or later (32-bit and

64-bit editions)

• Windows 8 (32-bit and 64-bit editions)

■

Other requirement

• An ISIS-compatible application or a TWAIN-compatible

application that is compatible with the above operating
systems.

• .NET Framework 3.5 or later

WARNING

• Use the latest USB 2.0 driver made available by Microsoft. For

details, consult your local authorized Canon dealer.

• Scanning speeds are slower if your computer's standard USB

interface is USB Full-Speed (equal to USB 1.1.)

• The USB cable you are using should be the one originally

included with the scanner.

• If the CPU, memory, interface card, and other specifications

do not satisfy the installation requirements, the scanning
speed may be greatly reduced and transmission may take a
long time.

• Even if the computer satisfies the recommended

specifications, the scanning speed may vary, depending on
the specified scan settings.

• The scanner drivers provided with the scanner do not

necessarily operate on all ISIS or TWAIN-compatible
applications. For details, contact your application software
provider.

• Precautions for Use in 64-bit Operating Systems

– The scanner driver supplied with this product supports

scanning with 32bit applications only.

– Even with 32-bit applications, not all ISIS/TWAIN compliant

applications are guaranteed to operate.

– Scanning speed may vary depending on the specifications

of your computer.

Содержание imageFORMULA DR-G1100 Production Document...































































































































Результаты поиска

Содержание imageFORMULA DR-G1100 Production Document...

Отзывы:

Похожие инструкции для imageFORMULA DR-G1100 Production Document...

Бренды по названию

Популярные бренды

Canon imageFORMULA DR-G1100 Production Document..., Руководство пользователя

Результаты поиска

Содержание imageFORMULA DR-G1100 Production Document...

Отзывы:

Похожие инструкции для imageFORMULA DR-G1100 Production Document...

Бренды по названию

Популярные бренды