64
5
Push the retard roller to the right to separate it from its axis and
remove it.
6
Use a cloth dampened with water and thoroughly wrung out to
wipe the roller clean.
Attaching the Roller Unit and Retard Roller
1
Attach the Retard Roller.
Set the retard roller in the recess inside the roller cover.
Make sure the roller's notch is aligned with the axis on the front unit, and
then push the roller further into the recess.
2
Close the cover.
Check that you hear a clicking sound and the roller is pushed in com-
pletely.
3
Attach the roller unit.
Insert the shaft pin of the roller unit into the notch on the scanner (A), and
attach the lock lever vertically (B).