background image

51

When Select Scan Job:

For Select Scan Job, configure the scanner settings for each job.

Setting Basic Items

Scanner settings include the basic items that are configured in 
[Scanner setting], and the setting items that are configured in the 
advanced settings dialog box. The settings in the advanced settings 
dialog box are applied for settings other than the basic items.
The settings in the driver settings dialog box are applied for any other 
settings.

Color mode

Select from the following modes for scanning documents.
Detect automatically Detects whether the document is color or gray 

and then scans.

24-bit Color

Scans the document in color.

Grayscale

Scans the document in Grayscale.

Black and White

Scans the document in black and white 
(binary).

Page Size

Specify the page size of the document.
If you specify [Match original size], the page size of the scanned 
document is detected and the images are saved at the detected size.

Dots per inch

Specify the scanning resolution.
When [Detect automatically] is specified, the resolution is detected 
automatically from the content of the scanned document.

Scanning Side

Specify whether to scan only one side or both sides of a document.
When [Skip blank page] is specified, any blank paged detected within 
the document is skipped during scanning.
When scanning a folded document, select [Folio].

Automatically straightens skewed images

When a document is scanned skewed, the skewed scanned images 
are detected and then straightened.

Rotate image to match orientation of text

The orientation of text in scanned images is detected, and the images 
are rotated so that the text is correctly oriented.

Use advanced settings dialog box

Configure scanner settings other than the basic items in the advanced 
settings dialog box. To open the advanced settings dialog box, select 
[ON] and then click the 

 button.

For details on the setting items, see the Help of the driver settings 
dialog box.

Hint

The driver settings dialog box includes setting items that are the 
same as the basic items in [Scanner setting], but the setting for each 
of the them is stored separately. Which settings are used during 
scanning differs as follows depending on the setting of the [Use 
advanced settings dialog box] check box.

0-00-DR-C125_RG_UK.book  Page 51  Friday, May 27, 2011  6:54 PM

Содержание imageFormula DR-C125





































































Отзывы: