Canon imageFormula DR-6010C, Руководство пользователя

Страница: 59 / 142

Chapter 3 Basic Operation
3-29
3-8 Other Functions
This scanner also supports the scanning functions described below.
• Folio Scan
Documents larger than A4 (up to A3) can be scanned by folding them first.
• Double Feed Detection Function
The scanner will detect a double feed and stop scanning.
• Long Document Mode
Allows scanning of documents up to 39.2” (1,000 mm) in length.
• MultiStream Function
Two types of images are output from a single scanning pass.
Folio Scan
This function supports the scanning of documents that are larger than A4 and therefore do not fit in
the feeder. (The maximum size is A3.) To use the function, fold the document and place it into the
feeder. The DR-6010C will scan both sides and combine the scanned images into a single image.
• To use this function, select Folio as the “Scanning Side” setting. For details, see Chapter 7,
“ISIS/TWAIN Driver Settings.”
• The scanned image of the front side of the document becomes the left half of the combined
image.
• The maximum size for the combined image is A3. When using the Folio function for an
irregular-sized document, set Page Size to “Auto-detection.”
• When you face the front of the scanner, the fold should be on the right side.
IMPORTANT
• When folding the document, align the right and left sides and create a sharp, straight fold.
Otherwise the document may jam or the image may not be aligned properly.
• The fold line itself will not be scanned. Keep this in mind if there is content such as photos,
diagrams, or text that spans the fold.
• For Folio scanning, only bypass mode ( P.3-7 ) can be used.
• Adjust the document guides to fit the width of the document. Otherwise, the image may
scan as skewed or shifted.
Front
Rear
Combined image