6
Fan the paper stack and even the edges.
7
Load the paper stack of the appropriate size with the print
side facing up.
When loading paper, be careful not to cut your fingers at the
edges of the paper.
Make sure the paper stack does not exceed the load limit
mark (A) and it is loaded under the small fins (B) on the paper
guides.
Each paper drawer holds approximately 0 sheets of paper
( lb bond (80 g/m
)).
8
A3
A4
A4
A5
B5
LGL
LTR
STMT
U2
B4
B5
11
X
17
LTR
U1
U3
Set the paper-size detecting lever, located on the left side
of the paper drawer, to match the size of the paper being
loaded.
Be sure to set the paper-size detecting lever correctly. If the lever
is positioned incorrectly, the wrong paper type will be shown on
the touch panel display. This may also cause paper jams, dirty
prints, etc.
–
–
