1
2
3
4
5
6
7
8
1-11
6.
Confirm that <PASSWORD> is displayed,
then press [OK].
7.
Use the numeric keys to enter the memory
reception password (up to seven digits), then
press [OK].
8.
Confirm that <REPORT PRINT> is displayed,
then press [OK].
9.
Use [
] or [
] to select <ON> or <OFF>,
then press [OK].
<ON>: Prints a memory reception report.
<OFF>: Does not print a memory reception report.
10.
Confirm that <MEMORY RX TIME> is
displayed, then press [OK].
Perform steps 10 to 15 to specify the period of memory reception.
11.
Use [
] or [
] to select <ON>, then press
[OK].
12.
Confirm that <MEM RX START TIME> is
displayed, then press [OK].
13.
Use the numeric keys to enter the start time
(in 24-hour format), then press [OK].
14.
Confirm that <MEM. RX END TIME> is
displayed, then press [OK].
15.
Use the numeric keys to enter the end time,
then press [OK].
16.
Press [Stop] to return to standby mode.
Printing All Documents Stored in Memory
1.
Perform steps 1 to 3 in “Memory Reception,”
on p. 1-10.
2.
Use [
] or [
] to select <MEMORY
LOCK>, then press [OK]
P A S S W O R D
1 2 3 4 5 6 7
Ex.
M E M R X S T A R T T I M E
0 0 : 0 0
Ex.
