Canon imageCLASS MF4100 Series, Руководство по обслуживанию

Страница: 128 / 140

Chapter 13
13-6
13.2.4.2 Bit 1 Elaborated
0014-6099
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
An alarm goes off when the transmission has been terminated due to some error. Change the setting to OFF in order to make this alarm inactive.
13.2.4.3 Bit 2 Elaborated
0014-6100
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Enables to select a page timer used during manual sending.
13.2.5 SSSW-SW16
13.2.5.1 Function List
0014-6113
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
T-13-5
13.2.5.2 Bit 3 Elaborated
0014-6116
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
Enables to select the width of original reading.
When 'Letter' is selected, a letter-sized original will be read with the letter width (214mm).
13.2.6 SSSW-SW21
13.2.6.1 Function List
0014-6191
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
T-13-6
13.2.6.2 Bit 4 Elaborated
0014-6192
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
When received data in G3 mode consists 100 lines or less, the data can be chosen to print or not to print. If the setting is changed to 'Do Not Print,' received data
with 100 or less lines will be canceled and will not be printed out.
13.2.7 SSSW-SW30
13.2.7.1 Function List
0014-6255
i-SENSYS MF4150 / i-SENSYS MF4140 / i-SENSYS MF4120 /
T-13-7
Bit Function 1 0
1 Not in Use - -
2 Not in Use - -
3 Original Reading Width Letter A4*
4 Not in Use - -
5 Not in Use - -
6 Not in Use - -
7 Not in Use - -
8 Not in Use - -
Bit Function 1 0
1 Not in Use - -
2 Not in Use - -
3 Not in Use - -
4 Received data in G3 mode contains 100 lines or less. Print Do Not Print*
5 Not in Use - -
6 Not in Use - -
7 Not in Use - -
8 Not in Use - -
Bit Function 1 0
1 Not in Use - -
2 Not in Use - -
3 Not in Use - -
4 Not in Use - -
5 Not in Use - -
6 Not in Use - -
7 Duration of Pause 1* 0
8 Duration of Pause 1 0*