1
2
3
4
5
6
4-3
Printing Reports Automatically
TX RESULT REPORT, RX RESULT REPORT, and ACTIVITY
REPORT can be set to print automatically.
■
TX RESULT REPORT
1.
Press [Additional Functions].
2.
Use [
] or [
] to select <REPORT
SETTINGS>, then press [OK].
3.
Use [
] or [
] to select <SETTINGS>,
then press [OK].
4.
Use [
] or [
] to select <TX RESULT
REPORT>, then press [OK].
5.
Use [
] or [
] to select the setting you
want, or <OFF>, then press [OK].
<PRINT ERROR ONLY>: Prints a report only when a
transmission error occurs.
<OUTPUT NO>: Does not print a report.
<OUTPUT YES>: Prints a report every time you send a
document.
6.
Press [Stop/Reset] to return to standby
mode.
Report Items
The following items are displayed in the Transmission Result
Report:
●
JOB NO.: Job number
●
TYPE: Type of transmission
– TX: Memory transmission
– BROADCAST: Broadcasting
●
NO.: Sequence number
●
DESTINATION TEL/ID: Name and number of recipient
●
DATE: Date of transaction
●
TIME: Time of transaction
●
PAGE: Number of pages sent
●
DURATION: Amount of time taken for a transaction
●
MODE: Mode of transaction (G3 or ECM)
