Canon imageCLASS MF273dw Скачать руководство пользователя страница 461

Страница: 461 / 633

[Device Management]

94LS-0C4

Specify and manage settings for information and operations relating to the machine’s hardware.

* Values in bold red text are the default settings for each item.

[Device Information Settings](P. 452)
[Select Country/Region](P. 452)
[Display Job Log](P. 452)
[Displ. Consmbls. Info (RUI/Toner Status)](P. 453)
[Scan with Canon PRINT Business](P. 453)
[Notify to Check Paper Settings](P. 453)
[Canon Genuine Mode](P. 453)

[Device Information Settings]

[Menu] [Management Settings] [Device Management]

Specify a name to identify the machine and the installation location.

The information specified here appears in the Remote UI Portal page. Portal Page of Remote UI(P. 352)

[Device Name]
[Location]

[Select Country/Region]

[Menu] [Management Settings] [Device Management]

Specify the country or region where the machine is used. The default setting may vary depending on the setting

selected at initial power-ON.

* Depending on your country or region, the [Select Country/Region] setting may not be available, or its content or

default setting may be different.

[

United States (US)

]

[Canada (CA)]
[Brazil (BR)]
[Mexico (MX)]
[Panama (PA)]
[Other]

[Display Job Log]

[Menu] [Management Settings] [Device Management]

Specify whether the logs for printing and faxing are shown on the Status Monitor screen and in the communication

management reports.

[Status Monitor] Screen(P. 116)

Checking Usage and Logs with Remote UI(P. 354)

Printing and Viewing Reports and Lists(P. 359)

[Off]
[

]

Settings Menu Items

452

Содержание imageCLASS MF273dw


























































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageCLASS MF273dw

Отзывы:

Canon imageCLASS MF273dw, Руководство пользователя, Страница: 461 / 633

Результаты поиска

Содержание imageCLASS MF273dw

Отзывы: