Canon imageCLASS LBP325dn, Руководство по обслуживанию

Страница: 106 / 252

Functional cat-
egory
Sub category Description
Data transmis-
sion:
Debug log Send data such as device Debug logs and DCON logs to the server.
Operation in-
struction Operation check Contact the server to check if there is processing to be executed, and receive
the
following instructions if any.
• Change the schedule
• Change the alarm level
• Change the alert filter
Cautions when Using E-RDS
• The following settings in service mode must not be change unless there are specific instructions to do so.
Changing these values will cause error in communication with UGW.
• Port number of UGW
SERVICE MODE > NETWORK GR. > E-RDS > RGW-PORT
Default :
• If the e-Maintenance/ imageWARE Remote contract of the device is invalid, be sure to turn OFF the E-RDS setting (E-RDS :
0).
• The following restrictions apply when enabling IPv6 in the network settings.
• If the router advertisement expires while the machine is in the sleep mode when only a stateless address is enabled,
transmission will fail immediately after the machine returns from the sleep mode.
• When only a manual address is enabled, it is necessary to set a default router address.
• When only DHCPv6 is enabled, transmission fails because the router address is unknown.
Setting Procedure
■ Preparation
Since this function communicates with the UGW server, it is necessary to connect to the external network.
Check the following items, and make the settings if not yet set.
• IP address settings
• DNS server settings
• Proxy server settings
*1
• Installation of CA certificate (arbitrary
*2
)
CAUTION:
• Obtain the information on the network environment from the system administrator of the user.
• When having changed the network settings, turn OF and then ON the main power of the machine.
*1. If authentication is necessary, make the settings of the authentication information as well.
*2. When using a certificate other than those pre-installed in the device
3. Technical Explanation (System)
96