Canon imageCLASS D880 Скачать руководство пользователя страница 65

Страница: 65 / 85

8-3

❚

Cannot send using the Error Correction Mode (ECM).

The other party’s fax machine may not support ECM.

• If the other party’s fax machine does not support ECM, then the document is sent in the normal mode without

error checking.

ECM may be disabled.

• Make sure that ECM is on. (

→

p. 9-5)

❚

Errors occur frequently while sending.

The telephone lines may be in poor condition, or you may have a bad connection.

• Select a slower transmission speed. (

→

p. 9-4)

Receiving Problems

❚

Cannot receive a fax automatically.

The machine may not be set to receive automatically.

• For the machine to receive faxes automatically, the receive mode must be set to

FaxTel

FaxOnly

AnsMode

DRPD

(

→

Chapter 5). If you have set

AnsMode

, confirm that an answering machine is

connected to the machine, and that it is turned on with a properly recorded outgoing message. (

→

p. 5-2)

The machine’s memory is full.

• Print out or delete any documents stored in memory to free up space. (

→

p. 4-13, 4-14)

An error may have occurred during reception.

• Print an ACTIVITY REPORT and check for an error. (

→

p. 7-2)

No paper in the cassette.

• Make sure that paper is loaded in the cassette. (

→

Set-up Instructions)

The telephone line may not be connected properly.

• Make sure that all line connections are secure. (

→

p. 1-3)

❚

The machine does not switch automatically between telephone and fax reception.

The machine may not be set to switch automatically between telephone and fax reception.

• For the machine to switch automatically, the receive mode must be set to

FaxTel

AnsMode

DRPD

(

→

Chapter 5). If you have set

AnsMode

, confirm that an answering machine is connected to the machine and that

it is turned on with an outgoing message properly recorded. (

→

p. 5-2)

The sending fax machine cannot send the CNG (Calling Tone) signal that tells the machine that the
incoming signal is a fax.

• Some fax machines cannot send the CNG (Calling Tone) signal that tells your machine the incoming call is

from a fax machine. In such a case, you will have to receive the fax manually. (

→

p. 5-6)

roubleshooting

08 FAX_Chp8.qxd 6/17/04 12:48 PM Page 8-3

Содержание imageCLASS D880






















































































Результаты поиска

Содержание imageCLASS D880

Отзывы:

Canon imageCLASS D880, Руководство по факсу, Страница: 65 / 85

Результаты поиска

Содержание imageCLASS D880

Отзывы: