Canon imageCLASS D860, Руководство по факсу, Страница: 74 / 85

9-6
3.AUTO REDIAL
Sets whether to perform automatic redialing when the
other line is busy or no answer.
ON
Customizes the redial operation.
OFF
After the first attempt at dialing fails, redialing is not
attempted.
1.REDIAL TIMES
Sets the number of retries.
1
to
10 TIMES
(
2 TIMES
)
2.REDIAL INTERVAL Sets the period of time between redialings.
2
to
99 MIN.
(
2 MIN.
)
3.TX ERROR RESEND Redialing is attempted when a transmission error occurred.
ON RESEND TX FROM
: Sets the number of pages to be
sent when redialing is attempted.
ERROR & 1ST PAGE
,
ERROR PAGE
,
ALL PAGES
OFF
Redialing is not attempted when a transmission error has
occurred.
4.ERASE FAILED TX
Sets the
ERASE FAILED TX
function.
ON
The document is deleted from the memory if a
transmission error has occurred.
OFF
The document is not deleted from memory stored in the
machine even if a transmission error has occurred.
5.TIME OUT
Enables/disables automatic scanning of documents after
the fax number is entered using speed dialing.
ON
Scanning begins automatically in 5 or 10 seconds after
you enter the phone number.
OFF
Press Start to scan the document. Otherwise, the
machine will return to the standby mode after two
minutes while the
AUTO CLEAR
function activates.
RX SETTINGS
Sets the reception functions.
1.ECM RX
ECM (error correction mode) receiving is turned on or off.
ON
All receptions are conducted with ECM if the other
party’s fax supports ECM.
OFF
ECM is turned off.
2.FAX/TEL OPT.SET
When
FaxTel
has been set, the optional settings are
available.
1.RING START TIME
Sets the duration that the machine listens for a fax tone
before ringing.
0
to
30 SEC
(
8 SEC
)
2.F/T RING TIME
Sets the length of time the machine rings to alert you of
an incoming call.
15
to
300 SEC
(
15 SEC
)
3.F/T SWITCH ACTION
Selects the action taken after the
F/T RING TIME
expires.
RECEIVE
The machine switches to the fax receive mode
automatically, and starts to receive the document.
DISCONNECT
The machine disconnects the call.
(The factory default setting is in
bold
face.)
Name Description
09 FAX_Chp9.qxd 6/17/04 2:37 PM Page 9-6