manualshive.com logo in svg

Canon imageCLASS D780, Руководство по факсу, Страница: 24 / 94

Поделиться
Скачать
Canon imageCLASS D780 Скачать руководство пользователя страница 24

3-1

Speed Dialing

3

Speed dialing allows you to simplify dialing procedures by registering a fax/telephone number(s) and name under
a one-touch speed dialing key or coded speed dialing keys. You can then dial that number by pressing only one or
a few keys.

Speed Dialing Methods

There are three speed dialing methods available with your machine as follows:

■

One-Touch Speed Dialing (

→

p. 3-2)

Allows you to dial a fax or telephone number by pressing only one key. You can register up to 12 destinations
for one-touch speed dialing.

■

Coded Speed Dialing (

→

p. 3-4)

Allows you to dial a fax or telephone number by pressing 

Coded Dial

followed by a two-digit code of your

choice. You can register up to 100 different destinations.

■

Group Dialing (

→

p. 3-7)

Allows you to dial a group of registered one-touch and/or coded speed dialing fax numbers. By registering a
group for one-touch or coded speed dialing, you press only one or a few keys to send the same document to
several destinations.

The following pages describe how to register numbers for speed dialing.

• For instructions on dialing using the speed dialing methods, 

→

pp. 4-3, 4-4.

NOTE

What is Speed Dialing?

Speed Dialing

Chapter 3

03 FAX_Chp3.qxd  03.7.10 3:58 PM  Page 3-1

Содержание imageCLASS D780































































































Отзывы:

Нет отзывов