Canon image Prograf iPF780 Series, Руководство пользователя

Страница: 386 / 648

Specifying the Cutting Method for Rolls
Specifying the Cutting Method for Rolls
How rolls are cut after ejection varies depending on printer settings.
Cutting Method Printer Setting Driver Setting
Automatic The roll is automatically cut by the Cutter Unit follow-
ing printer driver settings. Media
Menu
> Pa-
per Details
> (Various
Types of
Paper) >
Cutting
Mode
Automatic Automatic
Cutting Yes
Eject (wait-
ing for ink to
dry after
printing) Choose this setting if you prefer not to have docu-
ments dropped immediately after printing, as when
waiting for ink to dry.
To cut the roll with the Cutter Unit, press the
Cut but-
ton.
Eject Yes
Manual
(when using
media that
cannot be
cut with the
Cutter Unit ) Choose this setting when using media that cannot be
cut using the Cutter Unit.
Cut each page from the roll using scissors. For con-
tinuous printing (if you will cut each page later), se-
lect
Automatic Cutting > Yes or select Print Cut
Guideline .
(See "Cutting Roll Paper After Printing.")
➔
P.152
Manual No , Yes , Print
Cut Guideline
Paper cut-
ting (to have
the roll cut
at your
specified
position) Choose this option if you want to cut pages by press-
ing Cutter Unit buttons for manual cutting after print-
ing when
Automatic Cutting > No is selected or
Print Cut Guideline is selected in the printer driver.
Otherwise choose this option if you want to cut the
roll edge after loading a roll.
Cut button
pressed
Yes No , Print Cut
Guideline
Note
• Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.
•
With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping the
preset cutting mode.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, prin-
ted documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing quality
or cause rough cut edges.
Specifying the Cutting Method for Rolls
iPF780
User's Guide
Handling and Use of Paper
Handling rolls
386