Canon image Prograf iPF680 Series, Основное руководство

Страница: 92 / 132

Cause Corrective Action
Cut Speed is not configured correctly in the
Control Panel menu.
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.")
➔
P.50
During cutting, printed documents fall out at
an angle. In the Control Panel menu, set Cutting Mode to Eject . Hold documents after print-
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.")
➔
User's Guide
Paper is not cut Paper is not cut
Cause Corrective Action
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting .
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).")
➔
User's Guide
(See "Paper Detailed Settings Dialog Box (Mac OS).")
➔
User's Guide
In the Control Panel menu, Cutting Mode is set to Eject
or Manual .
If the Cutting Mode is Eject , press the Cut button to cut the paper.
If the Cutting Mode is Manual , cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.")
➔
User's Guide
Depression on the leading edge is left
Depression on the leading edge is left
Cause Corrective Action
Keeping a roll in the printer for a long time
without printing on it may leave a depres-
sion on the leading edge. When printing quality is most important, we recommend setting TrimEdge Reload to
On or Automatic so that the paper edge is automatically cut before printing.
(See "Menu Structure.")
➔
P.50
The size of clear film cannot be detected
The size of clear film cannot be detected
Cause Corrective Action
The Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.
(See "Cleaning Inside the Top Cover.")
➔
P.41
Roll Paper is Continuously Ejected
Roll Paper is Continuously Ejected
Cause Corrective Action
Although sheets are
selected as the paper
source, a roll was ad-
vanced. After roll ejection stops, follow these steps to reload the roll.
1. Push the Release Lever back.
2. Open the Roll Cover.
3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that
both ends of the roll are rewound evenly.
4. Pull the Release Lever forward.
5.
Load the roll. At this time, be sure to press the Load button and select " Load Roll Paper ".
(See "Loading Rolls in the Printer.")
➔
P.15
Paper is not cut
iPF680 Series
Basic Guide
Troubleshooting
Problems Regarding Paper
92