(
8
/ 12)
3. TECHNICAL REFERENCE
3-1. FAQ (Specific Problems and Solutions)
(1) New items specific to i80 / PIXUS 80i
No. * Function
Symptom
Condition
Cause
Solution
Possible call or
complaint
1. B
C
o
mmu
ni
ca
tion
Status Monitor does not
display printer status
(remaining ink amount,
printer error, etc.).
- When printing is attempted via
infrared communication under
Windows 2000 / XP (the problem
can occur also in the i70 / PIXUS
50i).
- When printing via Bluetooth
connection is attempted (only
with Microsoft Bluetooth stack, as
of January, 2004).
Because the printer supports
uni-directional communication in
the specified conditions.
- With regard to printer errors, identify
the error by LED indication.
- Regarding remaining ink amount, no
detection is available.
- The remaining ink
amount is not detected
in infrared or Bluetooth
printing.
2. C
C
o
mmu
ni
ca
tion
“This document failed to
print,” etc. is displayed.
- When printing is attempted via
infrared communication under
Windows 2000 / XP (the problem
can occur also in the i70 / PIXUS
50i).
- When printing via Bluetooth
connection is attempted (only
with Microsoft Bluetooth stack, as
of January, 2004).
a. As the printer supports
uni-directional communication
in the specified conditions, the
message will be displayed
unless the printer is ready for
data reception.
The printer is NOT ready for
data reception:
-
during
power-off.
- when a printer error occurs.
- while performing another print
job.
-
during
cleaning.
- when the print head cover is
open.
b. Because the HCRP print
service is not enabled.
a. By LED indication, check the printer
status.
- Turned off: Turn the printer on.
- Blinks in orange: Clear the error.
- Blinks in green: If other print
job(s) or cleaning is being
performed, wait until the operation
completes. After completion of the
operation, the message will
disappear and printing will start
automatically.
If the print head cover is open,
close it.
b. In Control Panel, select Printers and
Other Hardware, and Wireless Link.
In the Bluetooth tab, click the i80 /
PIXUS 80i printer icon, and
Properties. In the Services tab, check
the Printing (HCRP) option, and click
OK.
- “This document failed
to print” is displayed.
* Occurrence level:
A: The symptom is likely to occur frequently.
B: The symptom may occur under certain conditions, but likeliness is assumed very low in practical usage.
C: The symptom is unlikely to be recognized by the user, and no practical issues are assumed.
