Canon i-SENSYS LBP5300 Series, Руководство по обслуживанию

Страница: 147 / 150

Chapter 5
5-21
T-5-12
T-5-13
T-5-14
T-5-15
T-5-16
Service Mode > Adjust gr.
Item Description Setting Range
CALIBRATION Set ON/OFF of calibration. ON*/OFF
CHARGE BIAS Y Set the charging bias value. (Yellow) -10 to 10 (0*)
CHARGE BIAS M Set the charging bias value. (Magenta) -10 to 10 (0*)
CHARGE BIAS C Set the charging bias value. (Cyan) -10 to 10 (0*)
CHARGE BIAS K Set the charging bias value. (Black) -10 to 10 (0*)
DEV BIAS Y Set the developing bias value. (Yellow) -10 to 10 (0*)
DEV BIAS M Set the developing bias value. (Magenta) -10 to 10 (0*)
DEV BIAS C Set the developing bias value. (Cyan) -10 to 10 (0*)
DEV BIAS K Set the developing bias value. (Black) -10 to 10 (0*)
FRONT TRANS Y Set the transfer bias value for the surface. (Yellow) -30 to 40 (0*)
FRONT TRANS M Set the transfer bias value for the surface. (Magenta) -30 to 40 (0*)
FRONT TRANS C Set the transfer bias value for the surface. (Cyan) -30 to 40 (0*)
FRONT TRANS K Set the transfer bias value for the surface. (Black) -30 to 40 (0*)
BACK TRANS Y Set the transfer bias value for the back. (Yellow) -40 to 30 (0*)
BACK TRANS M Set the transfer bias value for the back. (Magenta) -40 to 30 (0*)
BACK TRANS C Set the transfer bias value for the back. (Cyan) -40 to 30 (0*)
BACK TRANS K Set the transfer bias value for the back. (Black) -40 to 30 (0*)
PG TRANS YMCK Set the sheet-to-sheet bias value. -20 to 50 (0*)
FRONT ATTACH Set the attraction bias value for the surface. -20 to 50 (0*)
BACK ATTACH Set the attraction bias value for the back. -20 to 20 (0*)
FRT FUSE TEMP Set the fixing temperature value for the surface. -4 to 4 (0*)
BCK FUSE TEMP Set the fixing temperature value for the back. -4 to 4 (0*)
Service mode > F/W update gr.
Item Description Settings
USB executes upgrading of the controller firmware* (only if USB) ----
NETWORK executes upgrading of the controller firmware ----
Service Mode > Function gr.
Item Description Setting Range
RESTORE DCON Restore the backup information of the DC controller NVRAM that the video controller retains to the
DC controller NVRAM. ----
CLEAR DCON Initialize the backup area of the DC controller NVRAM in the video controller. ----
COLOR_MODE_SLCT Set whether the judgment of color/mono print is performed at the printer side. ON/OFF*
Service mode > log gr.
Item Description Settings
SYSTEM LOG sets the system log mechanism ON*/OFF
Service mode > Network gr.
Item Description Settings
FTP SYSLOG Use it to set the various system log file acquisition functions. ON/OFF*
JOB SERIALIZE sets the connector serialization mechanism ON/OFF*