Canon I-Sensys LBP5050, Руководство по обслуживанию

Страница: 64 / 104

Chapter 3
3-16
2) Remove the left cover.
(page 3-2)
[Removing the Left Cover]
3) Remove the rear side cover.
(page 3-1)
[Removing the Rear Side Cover]
3.3.1.2 Removing the ITB Unit
0018-7136
LBP5050N / LBP5050
1) Open the front door [1].
F-3-69
2) Pull out the cartridge tray [1].
F-3-70
3) Push the claw [1] in the direction of the arrow [A], and remove the right
stopper [3] in the direction of the arrow [B] while pushing the right corner
[2] of the upper cover assembly.
4) Push the claw [4] in the direction of the arrow [C], and remove the left
stopper [6] in the direction of the arrow [D] while pushing the left corner
[5] of the upper cover assembly.
F-3-71
5) Remove the cartridge tray [1].
F-3-72
6) Disconnect the connector [1] and free the harness [3] from the harness
guide [2].
F-3-73
7) Remove the ITB fixing holder [1].
- 1 screw [2]
F-3-74
8) Hold the ITB unit [1] as shown in the following figure and remove it in
the direction of the arrow.
[1]
[1]
[4]
[5]
[6]
[D]
[1]
[2]
[3]
[A]
[B]
[C]
[1]
- Be sure not to touch the ITB [1].
- Be sure to hold the plate [2] pull it out forward.
- Be sure not to deform the plate [2].
[3]
[1]
[2]
[1]
[2]