Canon i 320, Упрощенное руководство по обслуживанию

Страница: 6 / 18

6
3. ERROR DIAPLAY
Errors are displayed by the LEDs, and warnings are displayed by the status monitor.
3-1. Operator Call Error (Orange LED blinking)
LED Display Content Corrective Action
Blinking 2 times Paper out Set the paper, and press the RESUME
button to feed the paper.
Blinking 3 times Paper jam Remove the jammed paper, and press
the RESUME button.
Blinking 6 times No cartridge installed Install the cartridge, and close the
access cover.
Blinking 7 times Cartridge installed improperly*
1
(Cartridge EEPROM data is abnormal.)
Re-install the cartridge properly, or
power off and on the printer with the
cartridge installed.
Blinking 8 times Waste ink full or platen waste ink full warning
(Approx. 95% of acceptable amount)
Press the RESUME button.
3-2. Service Call Error (Orange and green LEDs cyclical blinking)
LED Display Content Corrective Action
Blinking 2 times Carriage error Replace the printer as it has failed.
Blinking 6 times Internal temperature abnormal error Replace the printer as it has failed.
Blinking 7 times Waste ink full or platen waste ink full error Replace the printer as it has failed.
Blinking 8 times Abnormal temperature rise Replace the printer as it has failed.
Blinking 9 times EEPROM error Replace the printer as it has failed.
Blinking 10 times No cartridge installed detection excluding the
case of cartridge replacement (during printing)
Replace the printer as it has failed.
3-3. Warning (No LED display)
Content Remarks
Black ink low warning 1 (about half amount) Displayed in the status monitor only*
2
Color ink low warning 1 (about half amount) Displayed in the status monitor only*
2
Black ink low warning 2 (little amount, “!”) Displayed in the status monitor only*
2
Color ink low warning 2 (little amount, “!”) Displayed in the status monitor only*
2
Black ink low warning 3 (unknown amount, “?”) Displayed in the status monitor only*
2
Color ink low warning 3 (unknown amount, “?”) Displayed in the status monitor only*
2
Head temperature rise Displayed when the access cover is opened, the print
head temperature is high*
3
When the head temperature
lowers, the warning is released.
Head temperature over-rise protection The carriage stops during printing when the head
temperature is excessive.
*
1
: Same as when the non-supported cartridge (print head for S300/S330) is installed.
*
2
: Only when the ink remaining amount detection is ON. (Status is not displayed at OFF.)
*
3
: Printer operation at the warning: When the access cover is opened, the carriage does not move to the
cartridge replacement position.