Canon FPD-400D, Руководство по эксплуатации

Страница: 10 / 25

- 25 -
§1. CONFIGURATION
Make sure all of the following items are included in the packing box.
(If you find any item missing, please contact the dealer from whom you
purchased this product.)
(NOTE) : This operation manual describes the operation of both the
servo focus demand and focus positional servo module.
The focus positional servo module is required when the
servo focus demand is used with the digital “R” type and
“R” type lenses. (The focus positional servo module is not
necessary with the digital “A” type and “A” type lenses
since a focus servo module is already built in.) Note that
the focus characteristics curve selection function cannot
be used with the built-in focus module of the “A” type
lenses. Also, the product components below are grouped
according to the respective mechanism. If you find any
components missing, please contact the store where you
purchased the product.
FPD-400D product components
UNIT Q'TY
SERVO FOCUS DEMAND <FPD-400D> ................................ 1
CLAMPER <CR-10> ................................................................ 1
OPERATION MANUAL ............................................................ 1
FPM-420D product components
UNIT Q’TY
FOCUS POSITIONAL SERVO MODULE <FPM-420D> ......... 1
OPERATION MANUAL ............................................................ 1
(NOTE): Storing environment
Check the following points, and make sure the place where
the lens is stored satis
fi es the following conditions.
1. Store the lens only under the following ambient conditions.
Ambient temperature : -30°C to +60°C
Ambient humidity : up to 60%RH (no condensation)
2. Do not subject the product to strong physical shock or
vibration.
FPD-400D̲FPM-420D̲E-0819.indd 25 2010/08/20 16:09:01