Canon Finisher-R1, Общая временная диаграмма/Общая схема устройства

Страница: 9 / 16

3
2 General Circuit Diagram
Signal Names
List of Signal Names/Abbreviations (Finisher Unit)
The following presents the abbreviations of signals used in this manual and in drawings, and the meaning of each signal.
Reference: Signals enclosed by brackets [ ] are electrical signals, However, the state “1” or “0” of these analog signals cannot be indicated. Otherwise, the state of digital signals “1” or “0” can be indicated.
T-2-1
ASSIST-HP REAR END ASSIST GUIDE HP DETECT Signal
BIND-CL STACK EJECTION LOWER ROLLER CLUTCH DRIVE Signal
BUFF-P-SL BUFFER REAR END HOLDING SOLENOID DRIVE Signal
BUFF-
ROL-SL BUFFER ROLLER ALIENATE SOLENOID DRIVE Signal
DELIV-
ROL-SL 1ST DELIVERY ROLLER ALIENATE SOLENOID DRIVE Signal
F-COVER FRONTCOVER OPEN/CLOSE DETECT Signal
F-COVER-
SW FRONT DOOR CLOSED DETECT SWITCH Signal
FJOG-HP FRONT ALIGNMNT PLATE HP DETECT Signai
G-
CHANGE-
HP GEAR CHANGE HP DETECT Signal
INLET INLET PAPER DETECT Signal
INLET-
ROL-SL INLET ROLLER ALIENATE SOLENOID DRIVE Signal
JOGTRY-P PROCESSING TRAY PAPER DETECT Signal
RJOG-HP REAR ALIGNMNT PLATE HP DETECT Signal
SHUT-CL SHUYYER OPEN/CLOSE CLUTCH DRIVE Signal
SHUT-HP SHUTTER HP DETECT Signal
STP-HP STAPLER HP DETECT Signai
STP-
INFERE STAPLER ALIGNMENT INTERFERENCE DETECT Signal
STP-LS HOOK EMPTY DETECT Signai
STP-
READY HOOK TOP POSITION DETECT Signai
STPSFT-
HP STAPLER SHIFT HP DETECT Signal
STP-SW CARTRIDGE DETECT SWITCH Signal
SWG-HP SWING GUIDE HP DETECT Signai
SWG-SW SWING GUIDE OPEN DETECT SWITCH Signal