Canon FC220 Скачать руководство пользователя страница 13

Страница: 13 / 197

CHAPTER 1 GENERAL DESCRIPTION

1-1

I. FEATURES

1. Direct charging.

The charging roller directly charges paper, significantly reducing ozone emission.

2. Auto power-off.

The copier shuts off automatically when left alone for about 5 minutes after the last

copy operation.

3. Quick start.

The copier’s wait time is 0 second, always ready for quick copying work.

4. Cartridge type.

The core of the copier (photosensitive drum, toner case, charging roller, developing

assembly, and cleaning assembly) is integrated into a single cartridge. The user need
no more than replace the cartridge and perform simple cleaning to maintain the copier
in top condition.

5. Variety of copy effects.

In addition to black toner, the user has a choice of several colors. Taking advantage

of overlay copying, various copy effects may be obtained through mere replacement of
the cartridge.

6. Compact and light.

The copier is compact and light, providing good portability. It can easily substitute

as a personal copier.

7. Multifeeding (PC420/430/FC220).

A stack of copy paper may be placed on the pick-up tray. A press on the Copy Start

key is all it takes to generate multiple copies.

Содержание FC220

















































































































































































Результаты поиска

Содержание FC220

Отзывы:

Бренды по названию

Популярные бренды

Canon FC220, Руководство по обслуживанию

Результаты поиска

Содержание FC220

Отзывы:

Бренды по названию

Популярные бренды