Install the Printer Driver. (Windows 98/Me/2000/XP)
IMPORTANT
• DO NOT connect the USB cable before installing the software.
NOTE
• When installing the software in Windows XP or Windows 2000, log onto the system as a member of
the Administrator group.
• If the Found New Hardware Wizard appears, click Cancel, and follow this procedure.
1 Insert the CD-ROM into your CD-ROM drive.
2 If AutoRun is enabled, the installation starts automatically.
NOTE
• If installation does not start automatically, choose Run... from the Start Menu. Type D:\SETUP.EXE
(if your CD-ROM drive is drive D:) in the command line and click OK.
3 Click Install Printer Driver to start installation.
4 Follow the on-screen instructions to complete the installation process.
During installation, follow these guidelines:
• Click Next or Yes to move from one dialog box to the next.
• Be sure to wait for Windows to complete each setup step. If you hear the computer
working, wait until it is done.
• If the Digital Signature Not Found screen appears, click Yes to continue.
5 When prompted, remove the label from the USB port on the back of the machine.
Then connect the USB cable to the machine and your computer.
USB label
USB port
USB cable
