Canon FAXPHONE L75, Руководство пользователя

Страница: 124 / 201

9-2
Special Features Chapter 9
Special Dialing
Dialing Through a Switchboard
A PBX (Private Branch Exchange) is an on-site telephone switchboard. If your machine is
connected through a PBX or other telephone switching system, you will need to dial the
outside line access number first, and then the number of the party you are calling.
Entering Pauses in a Fax/Telephone Number
You may need to enter pauses in a fax/telephone number in the following situations:
– When you dial or register an overseas number. The length and position of the pause
depends on the telephone system of your country.
– When your machine is connected to a switchboard.
Follow this procedure to enter pauses when registering a number for speed dialing:
1
When you come to the step that
requires you to enter the fax/telephone
number, use the numeric buttons to
enter the number up to where a pause
is necessary.
• To correct a mistake in the number,
press
¬
to delete the rightmost digit.
Alternatively, press Clear to delete the
entire number.
2
Press Pause to enter a pause.
• A pause entered within a number (
P
) is
two seconds long.
• For a longer pause, press Pause again
for another two-second pause.
Alternatively, you can change the length of
the pause (
1
MID PAUSE SET
, p. 14-6).
3
Continue entering the rest of the fax/
telephone number with the numeric
buttons.
• If you enter the wrong number, press
Clear and start again from step 1.
4
To enter a pause at the end of the
number, press Pause.
• A pause at the end of a number (
P
) is
fixed to ten seconds.
5
Continue with the operation you are
performing.
TEL=011p811234P
TEL=011p811234_
TEL=011P_
TEL=011_