manualshive.com logo in svg

Canon FAXPHONE L190, Руководство по обслуживанию, Страница: 412 / 511

Поделиться
Скачать
Canon FAXPHONE L190 Скачать руководство пользователя страница 412

4

4

4-336

4-336

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Unit (MF4820d) > Procedure

Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Unit (MF4820d) > Procedure

Caution:
When mounting the duplex solenoid, align the solenoid lever [1] with the groove in 
the link [2], and insert the 2 solenoid positioning protrusions [3] into the 2 positioning 
holes [4] in the side panel to mount the solenoid.

[4]

[3]

[1]

[2]

Removing the Pickup Unit (MF4820d)

 

■

Preparation

1) Remove the left cover
2)Remove the copyboard cover and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.
6)Remove the duplex feed unit
7)Remove the main controller PCB

 

■

Procedure

1)Remove the main controller mounting plate[1]
•  1 screw(with washer)[2]
•  1 screw(black TP)[3]

x2

[1]

[2]

[3]

F-4-928

Содержание FAXPHONE L190
































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов