67
Fa
x
5
Press [
▲
] or [
▼
] to highlight <On>, and then press [OK].
Delayed TX
01/01/2012 12:52AM
Off
On
6
Enter the time at which you want to send the document, and then press
[OK].
7
Specify a destination (
→
p.63).
8
Press [
] (Start).
•
Your fax is sent at the specifi ed time.
Sending a Fax to an International Destination
(Adding Pauses)
When sending faxes to international destinations, it is sometimes diffi
cult to connect to a
recipient, due to the long distance that the signal must travel. You can insert a pause after
the international access code to reduce this problem.
1
Place your documents (
→
2
Switch to the Fax mode (
→
p.16).
3
Use the alphanumeric keys to enter the international access code.
•
For details about international access codes, contact your telephone service provider.
4
Press [
] (Redial/Pause) to enter a pause.
•
The letter <
p
> is displayed to indicate the pause.
•
The default pause added before the number is two seconds. To change the pause
time, see “<Pause Time>” (
→
p.76).
•
To add another pause, press [
] (Redial/Pause) again.
5
Use the alphanumeric keys to enter the country code, area code, and fax
number.
6
Press [
] (Redial/Pause), and then press [OK].
•
A pause added to the end of the number is fi xed at 10 seconds.
7
Press [
] (Start).
