Canon FAXPHONE L170, Основное руководство

Страница: 112 / 197

M
a
king Copi
e
s
10
Specifying the Paper Size and Type (Common for Cassette and Multi-Purpose Feeder) 10-2
Specifying the Paper Size and Type
(Common for Cassette and Multi-Purpose Feeder)
NOTE
•
When making copies on LTR-size paper after having continuously copied on paper smaller than LTR-size paper, the copies may be dirty.
To prevent copies from being dirty, wait about 1 minute before making copies.
•
The paper in the multi-purpose feeder is fed prior to the paper in the cassette.
•
The settings changed in the Menu do not return automatically to the settings you set previously. Change to the previous settings again if
necessary.
•
When making copies of a small size or heavy paper*, etc., the copy speed may be slightly slower than usual.
* The paper type should be selected in the Menu.
•
If you intend to make a copy and print with a thermal transfer printer using the same sheet of paper, make the copy first. Failure to do so
may make copies dirty or cause a paper jam.
•
When copying onto transparencies, remove each transparency from the output tray as it is output.
Specifying the Paper Size
At the factory, the paper size has already been set to <LTR>. Normally, you can make copies in this setting. When making
copies on other sizes of paper, you need to specify the paper size according to the following.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <1. PAPER SETTINGS>
➞
press [Set].
3
Press [ (-)] or [ (+)] to select <1. CASSETTE> or <2. MP TRAY>
➞
press [Set].
4
Press [ (-)] or [ (+)] to select <1. PAPER SIZE>
➞
press [Set].
5
Press [ (-)] or [ (+)] to select the appropriate paper size (A4, B5, A5, LTR, LGL EXECUTIV, ENVELOPE for the paper cassette,
A4, B5, A5, LTR, LGL, EXECUTIV, ENVELOPE or FREESIZE for the muiti-purpose feeder)
➞
press [Set].
●
When <ENVELOPE> is selected:
❑
Press [ (-)] or [ (+)] to select the appropriate envelope type (DL, ISO-C5, COM10, or MONARCH)
➞
press [Set].
●
When <FREE SIZE> is selected:
❑
Press [ (-)] or [ (+)] to select <VERTICAL SIZE> or <HORIZONTAL SIZE>
➞
press [Set].
❑
Use the numeric buttons, or press [ (-)] or [ (+)] to specify vertical and horizontal sizes of the paper in millimeters (mm).
Available setting range in <VERTICAL SIZE>: 127 mm to 356 mm (5” to 14”)
Available setting range in <HORIZONTAL SIZE>: 76 mm to 216 mm (3” to 8 1/2”)
❑
Press [Set].
Repeat the steps above to specify both vertical and horizontal sizes of the paper.
6
Press [Stop/Reset] to return to standby mode.
l-1100.book Page 2 Friday, February 27, 2004 7:04 PM