Canon FAX-L2000, Справочное руководство, Страница: 108 / 212

Using the Energy Saver Mode 2-32
G
e
tt
ing S
tarted
2
The machine does not enter the Energy Saver mode in the following cases:
• If documents are stored in memory
• If a document or paper jam has occurred, the paper cassettes have run out of paper, or if the
toner cartridge has run out of toner
• If a document has been fed into the ADF (Automatic Document Feeder)
• If you set the machine to print an Activity Management report at a preset time
• If the machine is set to poll another machine within three minutes or less, or is receiving a
document
NOTE
• While the machine is powering up, you can perform any operation.
• To put the machine into the Energy Saver mode manually, press
(Energy Saver).
Setting the Daily Timer
This section describes the procedure to set the time that the machine automatically enters the
Energy Saver mode for each day of the week.
NOTE
• If the current date and time are not set correctly, the Daily Timer will not function correctly.
1
Open all three one-touch speed dialing panels
➞
press [Data
Registration]
➞
[
▼
] or [
▲
] until <5.TIMER SETTINGS> appears
➞
press [OK].
If necessary, see steps 1 to 3 of “Turning the Energy Saver Feature ON”, on
p. 2-30.
2
Press [
▼
] or [
▲
] until <4.DAILY TIMER SET> appears
➞
press
[OK].
Data
Registration
OK
OK
TIMER SETTINGS
4.DAILY TIMER SET
➞
DAILY TIMER SET
1.SUN