9
Connect Power Cord
Connect Power Cord
Connect the power cord into the rear socket and
the wall outlet to turn on the machine.
The machine enters the standby mode.
What if...
●
<CARTRIDGE COVER OPEN> is displayed:
Make sure that the cartridge cover is closed properly.
(See “Install Cartridge,” on p. 3.)
●
<NO TONER CARTRIDGE> is displayed:
Make sure that the cartridge is installed properly.
(See “Install Cartridge,” on p. 3.)
●
<PAPER SIZE ERROR> is displayed:
Make sure that A4-size paper is loaded in the machine. (See “Load Paper,” on p. 5.)
If you loaded paper other than A4, make sure to set the correct paper size in the machine.
(See Chapter 3, “Print Media,” in the Basic Guide.)
WARNING
This product emits low level magnetic flux. If you use a
cardiac pacemaker and feel abnormalities, please move
away from this product and consult your doctor.
NOTE
– During electrical storms, disconnect the power cord
from the power outlet. (Please note that received
documents stored in the machine’s memory may be
lost when you unplug the machine.)
– Whenever you unplug the machine, wait at least five
seconds before you plug it in again.
– Do not plug the machine into an uninterruptible power
supply (UPS).
1 6 : 0 0 S T D 1 0 0 %
- S E T D O C . - F A X O N L Y
10
